Home / Technical guides / CP4 pump failure and fuel system restoration guide
Technical guide

CP4 Pump Failure: Fuel System Contamination Guide for Ford 6.7L Power Stroke and 5th Gen Ram Cummins

By the Maxzz Diesel technical team. Technical review: Waldyr Mazzer (40+ years in diesel injection, former Bosch and Delphi senior instructor) and Arthur Bonachella (Robiel and Diesel Tech Academy instructor).

Direct answer

When a CP4 high pressure pump fails, metal debris travels through the rail, the injector lines and every injector. Restoring the engine means replacing the pump, rails, lines and injectors together, flushing the supply side, replacing filters and verifying the repair on a bench, so the new pump is not contaminated by what the old one left.

CP4 pump failure and fuel system restoration guide

What a CP4 failure does to the fuel system

The CP4 is a Bosch common rail high pressure pump used on late-model diesel pickups, including the 2011 and newer Ford 6.7L Power Stroke, and the 2019 and newer Ram 6.7L Cummins. The repair follows one rule: find where the debris went before any new part goes on. When the pump wears internally, metal particles leave through the high pressure outlet. The rail, the injector lines and every injector then hold debris, and in many cases the return side and the supply side carry it back toward the tank.

This is why replacing only the pump does not fix the truck. The new pump pulls fuel that already contains debris from the tank side, and the new injectors, if they were left in place, are the first parts to be damaged. The repair has to treat the fuel system as contaminated from the pump to the tank.

What to replace

The list changes slightly by engine, but the principle is the same. Everything that held high pressure fuel after the pump is replaced, and everything on the supply and return side is cleaned or replaced.

ComponentActionWhy
High pressure pumpReplaceSource of the debris
Fuel rail or railsReplaceCannot be cleaned reliably
InjectorsReplaceDebris scores the control valve and nozzle
High pressure lines and connector tubesReplaceHold debris in the bores
Return lines and fuel temperature sensorReplace per the kitCarry debris back to the tank side
Tank, supply lines, lift pump and filtersFlush and replace the filtersProtect the new pump from remaining debris

Kits and part numbers by engine

Maxzz Diesel sells the repair as contamination kits so a shop orders one box: Contamination Kit Essentials for the Ford 6.7L Power Stroke (HC3Z-9B246-B for 2017 to 2019, EC3Z-9B246-B for 2011 to 2014) and for the 5th Gen Cummins 6.7L.

After the repair

Verify the repair rather than assuming it. Check rail pressure behavior with the scan tool, inspect the new filters after the first hours of operation and keep the old parts available for the customer. A used pump that has already shed metal should be returned with the engine and not reused in another repair. Rebuilders who repair CP3 pumps can use Robiel tool set 323.50.34 for the CP3.

Part numbers

Real part numbers from our catalog for this application. Press the button to add a line to your quote list.

Part numberTypeDescription and applicationCross-reference
Kits
EC3Z-9B246-BMaxzzFuel Contamination Kit for 2011 to 2014 Ford Super Duty 6.7L Power Stroke0445117023, 0445010649, 0445218017
HC3Z-9B246-BMaxzzFuel Contamination Kit for 2015 to 2019 Ford Super Duty 6.7L Power Stroke0445117043, 0986437441, 0445218017
Pumps
0445010649BoschHigh Pressure Fuel Pump for 2011 to 2014 Ford Super Duty 6.7L Power Stroke0986437422, 0445117023, EC3Z-9B246-B
0445010810BoschHigh Pressure Fuel Pump for 2011 to 2019 Ford Super Duty 6.7L Power Stroke0445117023, EC3Z-9B246-B, HC3Z-9B246-B
0445010851BoschHigh Pressure Fuel Pump for 2011 to 2014 Ford Super Duty 6.7L Power Stroke0986437422, 0445117023, EC3Z-9B246-B
Rails and lines
0445218017BoschFuel Rail for 2011 to 2019 Ford Super Duty 6.7L Power Stroke0445010810, 0445117023, 0281006064
0445218028BoschFuel Rail for 2020+ Ford Super Duty 6.7L Power Stroke0445118058
FD67.INJLINELEADHigh Pressure Injector Line for 2011 to 2019 Ford Super Duty 6.7L Power Stroke0445117023, 0445218017, FC3Z00812AA
Injectors
0445117023BoschFuel Injector for 2011 to 2014 Ford Super Duty 6.7L Power Stroke0986435415, FD67.INJLINE, FC3Z00812AA
0445117043BoschFuel Injector for 2015 to 2019 Ford Super Duty 6.7L Power Stroke0986435433, FD67.INJLINE, FC3Z00812AA
0445117094BoschFuel Injector for 2015 to 2019 Ford Super Duty 6.7L Power Stroke0986435433, FD67.INJLINE, FC3Z00812AA

Frequently asked questions

Can I reuse the injectors after a CP4 failure?

Not safely. Debris from the pump scores the control valve and nozzle, so injectors from a contaminated system are replaced or rebuilt and validated on a bench.

Is the contamination kit sold as one part number?

Yes. The Essentials kits are sold as one box so the shop orders a single number.

Does this apply to the Duramax L5P?

No. The Duramax L5P runs a Denso pump, not the Bosch CP4. See the Duramax L5P Denso G4S hub for its injectors and pump parts.

Next steps for this repair

1. Quote the parts in this guide

Part numbers from the table, matched by number.

See the parts table
2. Quote Robiel tools and Maxzz fluids

4113 CAL, 2271 Sonic and 2221S Solv.

3. Enroll in the course ($297)

Bosch Piezo Injector (0445115/116/117), with Arthur Bonachella.

Enroll Now ($297) ↗

More on this engine: Ford 6.7L Power Stroke CP4 part numbers and tooling.