Home / Technical guides / Bosch piezo injector ultrasonic cleaning warning
Technical guide

Why Bosch Piezo Injector Bodies (0445115/116/117) Must Never Go in an Ultrasonic Cleaner: Safe Cleaning & Testing Protocol

By the Maxzz Diesel technical team. Technical review: Waldyr Mazzer (40+ years in diesel injection, former Bosch and Delphi senior instructor) and Arthur Bonachella (Robiel and Diesel Tech Academy instructor).

Direct answer

The body of a Bosch piezo injector (0445115, 0445116, 0445117) must never go in an ultrasonic cleaner because the vibration and cavitation can damage the piezo actuator stack and its connections, and the damage often shows only after assembly. Clean the nozzle and metal parts separately, wipe the body, and validate on a bench.

Bosch piezo injector ultrasonic cleaning warning

What is inside a piezo injector body

A Bosch piezo injector replaces the solenoid with a stack of piezo ceramic layers. When voltage is applied the stack extends by a very small amount, and that movement is transferred hydraulically to the control valve. The stack is made of thin brittle layers, with electrical connections between them, sealed inside the body.

This is the reason the body is treated differently from every other injector. The stack is a precision component that cannot be repaired in a shop, and what damages it is not heat or chemicals but mechanical energy.

Why ultrasonic cleaning damages it

An ultrasonic cleaner works by creating cavitation bubbles that collapse against the surface of the part. That is exactly what removes carbon from nozzle components, and it is exactly what a ceramic stack cannot tolerate. The vibration can crack layers or loosen connections, and the injector may still test normally for a short time before the damage shows. The Diesel Tech Academy Bosch Piezo course teaches this rule with the safe rebuild that goes with it.

PartUltrasonic bathHow to clean it
Injector body with the piezo actuatorNeverWipe by hand with a lint-free cloth and solvent, blow dry with clean air
Nozzle and needleYes, in a separate basketMaxzz Fluid Series 2271 Sonic, then rinse with 2221S Solv
Metal spacers and shimsYes, in a separate basketKeep each injector set separate
Seals and O-ringsNoReplace, never reuse

Safe cleaning and testing protocol

1. Test the injector on a common rail bench with ISO 4113 calibration fluid and record delivery before opening it. 2. Remove the body from the ultrasonic workflow entirely and label the tray. 3. Clean nozzle parts and metal components in the ultrasonic bath, in a basket that does not touch the body. 4. Wipe the body by hand, replace seals and inspect the connector. 5. Assemble to the Bosch specification and run the post-rebuild bench test. 6. Compare delivery with the first test and with the other injectors in the set.

If an injector delivers normally on the first test and fails after a rebuild that included a full ultrasonic bath, check whether the body was in the bath before ordering a replacement nozzle.

Which injectors this covers

The 0445115, 0445116 and 0445117 families are Bosch piezo injectors used on common rail engines including the Ford 6.7L Power Stroke. The table lists the Bosch numbers we carry for that engine and the Robiel set for piezo injectors.

Part numbers

Real part numbers from our catalog for this application. Press the button to add a line to your quote list.

Part numberTypeDescription and applicationCross-reference
Injectors
0445117023BoschFuel Injector for 2011 to 2014 Ford Super Duty 6.7L Power Stroke0986435415, FD67.INJLINE, FC3Z00812AA
0445117043BoschFuel Injector for 2015 to 2019 Ford Super Duty 6.7L Power Stroke0986435433, FD67.INJLINE, FC3Z00812AA
0445117094BoschFuel Injector for 2015 to 2019 Ford Super Duty 6.7L Power Stroke0986435433, FD67.INJLINE, FC3Z00812AA
0445117096BoschFuel Injector for 2011 to 2014 Ford Super Duty 6.7L Power Stroke0986435415, FD67.INJLINE, FC3Z00812AA

Frequently asked questions

Can I ultrasonic clean the nozzle of a piezo injector?

Yes, the nozzle and metal components can go in the bath in a separate basket. The body with the piezo actuator never does.

Which fluids do you recommend?

Maxzz Fluid Series 2271 Sonic for the ultrasonic bath, 2221S Solv for solvent cleaning and 4113 CAL for bench testing.

Is there a course?

Yes. The Diesel Tech Academy Bosch Piezo Injector (0445115/116/117) course covers the rule and the safe rebuild.

Next steps for this repair

1. Quote the parts in this guide

Part numbers from the table, matched by number.

See the parts table
2. Quote Robiel tools and Maxzz fluids

4113 CAL, 2271 Sonic and 2221S Solv.

3. Enroll in the course ($297)

Bosch Piezo Injector (0445115/116/117), with Arthur Bonachella.

Enroll Now ($297) ↗

More on this engine: Ford 6.7L Power Stroke CP4 part numbers and tooling.